Best Price Low Carbon Steel Straight Line Wire Drawing Machine

• Customization: Available
• After-sales Service: Engineer Installation and Commissioning
• Warranty: 1 Year
• Model NO.: KY-LZ-560/6
• Type: LZ Straight-Line Metal Drawing Machine
• Usage: Wire
• Metal Material: Stainless Steel
• Outlet Diameter: 0.5-4.5mm
• Max.Inlet Wire Dia.: 6.5mm
• Block Dia.: 560mm
• Max. Number of Block: 10
• Certification: ISO
• Condition: New
• Core Components: Bearing, Motor, PLC
• Key Selling Points: High Productivity
• Capstan Diameter: 560 mm
• Drawing Dies: 6
• Drawing Speed: 12-18 M/Min
• PLC Brand: Siemens
• Motor Power: 22 Kw and 18.5 Kw
• Wire Materia: Low Carbon Steel Wire
• Die Box: Water-Cooling
• Transmission Mode: V-Belt
• Transport Package: Main Mechanical Plastic Packaging and Steel Wire
• Specification: 12*1.8*1.3(m)
• Trademark: KAIYE
• Origin: Hebei, China
• HS Code: 8463102000
• Production Capacity: 20 Sets/Year

Product Description

 

Machine Introduction

Production process :

Low carbon steel wire rod---High pay-off frame---Mechanical derusting---straight line wire drawing machine---Tension device --- wire take-up machine
 

Frame:
It is the foundation of the whole drawing machine units. It is welded by buttress plate, bent steel, section steel. All materials are designed safety enough to enhance the rigidity.

Drive:
Power by the AC frequency motor through high-frequency joint narrow V-belts, spread by the hardened reducer to capstan.

Capstan structure:

Material is ZG45 steel casting blank body, after quenching and tempering treatment, HB250. hardening layer height 100mm, depth more than 3mm, HRC 58-62,long service life.

Capstan cooling:

The main shaft of capstan is fixedly install an upper spiral water jacket, below is a water wheel. Capstan is
mounted on the spindle, the lower part of water jacket and capstan inner wall form 10-15 mm water storage. Inside of the capstan use narrow slit water cooling,forming good circulation water cooling.

Drawing die box:
Die box is welded structure, into two cavity. The guide roller is mounted into the side to ensure that steel wire can straight into the drawing die, die holder should be adjusted to wire tangent to enter the drawing rolls tuning roller installed at the entry end of the mold base tuning roll by a small cylinder put power, tuning the swing of the roller, so that the corresponding sensor output signal to fine-tune the speed of change.


 

Machine Specification

 

Items	Unit	LZ10/800	LZ9/700	LZ10/560	LZ10/400
Reel diameter	mm	800	700	560	400
Draw passage	time	10	9	10	10
Incoming dia	mm	Φ10-8	Φ8-6.5	Φ6.5-5.5	Φ14-8
Outgoing dia	mm	Φ4-3	Φ3-2.5	Φ2-1.8	Φ1-0.8
Wire darwing line	m/min	360	480	720	840
Incoming strength	Mpa	≤1300	≤1300	≤1300	≤1300
Total compressibility	%	84-85.94	85.94-85.21	90.53-89.29	87.24-84
Average compressibility	%	18.42-19.58	19.58-19.13	21.00-20.02	18.61-16.74
Single motor power	Kw	90-55	75-55	37-22	15-7.5

 

Machine Features

 

 

Drawing drum. The drum of drawing machine adopts narrow slot water cooling, which has good cooling effect. And it is not easy to enter the dust.The drum is sprayed with tungsten carbide coating to prolong the service life.

Tension device. The tension control system plays an important role in the process of wire take-up. It makes the wire rod bear the best tension and keep constant from beginning to end.

 

 

Control cabinet. High degree of mechanical automation, all kinds of fault information and processing information are displayed on the screen.

Inverter. The inverter cabinet has good heat dissipation performance, hard oxidation surface treatment, good friction resistance, and can effectively prevent dust.

Packaging & Shipping

 

Package.

The main machinery is packed with plastic film and fixed in the container with steel wire. Small mechanical parts are packed in wooden cases.

Shipment.

We can book containers for customers according to the mechanical size. If we need LCL, we can arrange to pack and send them to the designated place.

 

Company Information

 

 

Factory History. Hebei Kaiye Machinery Equipment Co., Ltd. was established in 2002. We are mainly engaged in the R & D, design, production and sales of CNC steel wire processing equipment, providing overall solutions for CNC steel wire processing. Products are widely used in railway, highway, bridge, tunnel, real estate, animal husbandry and other large-scale infrastructure construction, steel processing and distribution center and other fields.

Factory workshop. We have our own wire mesh machinery and several pilot plants with strong technical force and advanced production and checkout equipment.Our main products: straight line wire drawing machine,Pulley wire drawing machine, wet drawing machine, Copper wire drawing machine, Stainless steel wire drawing machine, Galvanized wire production line, Wire winding machine, And other wire drawing supporting machinery.

 

Factory R&D Team.

The factory has a strong and experienced R&D team. The average working experience of each engineer is more than 8 years.
 

Our technology is along the most advanced international route, and we can design reasonable solutions according to the requirements of customers.
 

Our service

Customer and Market

 

Friends from all over the world.
 

The company's machinery and equipment sell well in China, and are exported more than 100 countries and regions such as Romania, Lithuania, Turkey, Poland, Belarus, Ukraine, Russia, Kazakhstan, Saudi Arabia, Egypt, Algeria, South Africa,Vietnam, Thailand, India, Pakistan, Philippines, Indonesia, Australia, Mexico, Colombia, Argentina, Bolivia, Brazil, etc.
 

After more than ten years of development, the company has grown into one of the leading enterprises in the industry. We adhere to the tenet of "customer first, technology leading". In the future, the company will comprehensively promote industrial development and upgrading, and build the world's leading steel processing equipment.
 

Why choose us

Q: Are you a trading company or manufacturer?

A: Our company is a factory integrating production and sales. We can provide competitive prices and services.
 

Q:Where is your factory located?

A: Our factory is located in Anping county, Hebei Province of China. The nearest airport is Beijing airport or Shijiazhuang airport. We can pick you up from Shijiazhuang city.
 

Q: How many years are your company engaged in the wire mesh machines?

A: More than 20 years. We have our own technology develop department and testing department.
 

Q: Can your company send your engineers to my country for machine installation, worker training?

A: Yes, our engineers went to more than 60 countries before. They are very experienced.
 

Q: What's the guarantee time for your machines?

A: Our guarantee time is 2 years since the machine was installed in your factory.
 

Q: Can you export and supply the customs clearance documents we need?

A: We have much experience for exporting. And we can supply the CE certificate, Form E, certificate of origin etc, your customs clearance will be no problem.

 

If you are interested in our machines, 
please contact us now,
We will provide you with professional and reasonable solutions.