| After-sales Service: | Engineer Installation and Commissioning |
|---|---|
| Warranty: | 1 Year |
| Type: | LZ Straight-Line Metal Drawing Machine |
| Usage: | Wire, Rope Wire |
| Metal Material: | Steel |
| Outlet Diameter: | 0.5-4.5mm |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Production process :
Low carbon steel wire rod---High pay-off frame---Mechanical derusting---straight line wire drawing machine---Tension device --- wire take-up machine
Frame:
It is the foundation of the whole drawing machine units. It is welded by buttress plate, bent steel, section steel. All materials are designed safety enough to enhance the rigidity.
Drive:
Power by the AC frequency motor through high-frequency joint narrow V-belts, spread by the hardened reducer to capstan.
Capstan structure:
Material is ZG45 steel casting blank body, after quenching and tempering treatment, HB250. hardening layer height 100mm, depth more than 3mm, HRC 58-62,long service life.
Capstan cooling:
The main shaft of capstan is fixedly install an upper spiral water jacket, below is a water wheel. Capstan is
mounted on the spindle, the lower part of water jacket and capstan inner wall form 10-15 mm water storage. Inside of the capstan use narrow slit water cooling,forming good circulation water cooling.
Drawing die box:
Die box is welded structure, into two cavity. The guide roller is mounted into the side to ensure that steel wire can straight into the drawing die, die holder should be adjusted to wire tangent to enter the drawing rolls tuning roller installed at the entry end of the mold base tuning roll by a small cylinder put power, tuning the swing of the roller, so that the corresponding sensor output signal to fine-tune the speed of change.
|
Items
|
Unit
|
LZ10/800
|
LZ9/700
|
LZ10/560
|
LZ10/400
|
|
Reel diameter
|
mm
|
800
|
700
|
560
|
400
|
|
Draw passage
|
time
|
10
|
9
|
10
|
10
|
|
Incoming dia
|
mm
|
Φ10-8
|
Φ8-6.5
|
Φ6.5-5.5
|
Φ14-8
|
|
Outgoing dia
|
mm
|
Φ4-3
|
Φ3-2.5
|
Φ2-1.8
|
Φ1-0.8
|
|
Wire darwing line
|
m/min
|
360
|
480
|
720
|
840
|
|
Incoming strength
|
Mpa
|
≤1300
|
≤1300
|
≤1300
|
≤1300
|
|
Total compressibility
|
%
|
84-85.94
|
85.94-85.21
|
90.53-89.29
|
87.24-84
|
|
Average compressibility
|
%
|
18.42-19.58
|
19.58-19.13
|
21.00-20.02
|
18.61-16.74
|
|
Single motor power
|
Kw
|
90-55
|
75-55
|
37-22
|
15-7.5
|
|
Wire Pay off system.
Pay off system is usually according to the type in the picture, pneumatic lifting pulley, convenient wire threading.we can also produce hydraulic wire pay off systems. |
Derusting machine.
The derusting machine uses high-speed operation to twist the wire rod at different angles to remove the rust on the surface. |
|
Drawing drum.
The drum of drawing machine adopts narrow slot water cooling, which has good cooling effect. And it is not easy to enter the dust.The drum is sprayed with tungsten carbide coating to prolong the service life. |
Tension device.
The tension control system plays an important role in the process of wire take-up. It makes the wire rod bear the best tension and keep constant from beginning to end. |
|
Package.
The main machinery is packed with plastic film and fixed in the container with steel wire. Small mechanical parts are packed in wooden cases. |
Shipment.
We can book containers for customers according to the mechanical size. If we need LCL, we can arrange to pack and send them to the designated place. |
Q: Are you a trading company or manufacturer?
A: Our company is a factory integrating production and sales. We can provide competitive prices and services.
Q:Where is your factory located?
A: Our factory is located in Anping county, Hebei Province of China. The nearest airport is Beijing airport or Shijiazhuang airport. We can pick you up from Shijiazhuang city.
Q: How many years are your company engaged in the wire mesh machines?
A: More than 20 years. We have our own technology develop department and testing department.
Q: Can your company send your engineers to my country for machine installation, worker training?
A: Yes, our engineers went to more than 60 countries before. They are very experienced.
Q: What's the guarantee time for your machines?
A: Our guarantee time is 2 years since the machine was installed in your factory.
Q: Can you export and supply the customs clearance documents we need?
A: We have much experience for exporting. And we can supply the CE certificate, Form E, certificate of origin etc, your customs clearance will be no problem.
If you are interested in our machines,
please contact us now,
We will provide you with professional and reasonable solutions.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}